Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > PSE TAC 15/15i Crossbow Hunting Forum


Reply

Anyone receive their Elite back from recall yet?

 
LinkBack Thread Tools Display Modes
  #8  
Old 12-11-2013, 05:22 PM
Silver Member
 
Join Date: Jun 2006
Location: New Jersey
Posts: 108
Re: Anyone receive their Elite back from recall yet?

I received mine in August also. The cams seemed to be centered between the limbs.
Mike, Did the fix take care of the fletching contact issue?
Reply With Quote
  #9  
Old 12-11-2013, 05:41 PM
Junior Member
 
Join Date: Dec 2013
Posts: 8
Re: Anyone receive their Elite back from recall yet?

Not sure, I have not shot it yet.
Reply With Quote
  #10  
Old 12-11-2013, 08:41 PM
Silver Member
 
Join Date: Jun 2006
Location: New Jersey
Posts: 108
Re: Anyone receive their Elite back from recall yet?

You don't have to shoot it to see, just nock an arrow with the bow uncocked and look under the shaft. You can clearly see if the fletching will hit or not. I hope they got it right this time.
Reply With Quote
  #11  
Old 12-12-2013, 07:18 AM
Junior Member
 
Join Date: Dec 2013
Posts: 8
Re: Anyone receive their Elite back from recall yet?

Looks like the fletching clears by 1/8" all the way down.
Reply With Quote
  #12  
Old 12-12-2013, 05:08 PM
Silver Member
 
Join Date: Jun 2006
Location: New Jersey
Posts: 108
Re: Anyone receive their Elite back from recall yet?

That's great news, thanks.
Reply With Quote
  #13  
Old 12-15-2013, 12:21 PM
Junior Member
 
Join Date: Dec 2013
Location: Germany
Posts: 18
Re: Anyone receive their Elite back from recall yet?

Hey Mike,

those 1/8" are good to hear, but hard to believe for me.

Quote:
Looks like the fletching clears by 1/8" all the way down.
You checked it with or without the trigger sledge under the string ?
Reply With Quote
  #14  
Old 12-15-2013, 12:50 PM
Junior Member
 
Join Date: Dec 2013
Posts: 8
Re: Anyone receive their Elite back from recall yet?

I attached the string and the arrow as if I was going to cock and shoot. It was 1/8" clearance. It looks like a completely new block was installed.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 07:02 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC