Long Range Hunting Online Magazine

Turrets 101
Custom Made
Ballistic turret caps must be custom made to fit the particular specifications and ballistics of your rifle. Obviously, a .308 firing a 180-grain bullet is going to shoot very different than a .300 RUM with the same bullet. In order to build a custom turret cap, the manufacturer will need to know: 1) what distance you want to be zeroed at; and 2) the caliber, scope height, bullet weight, muzzle velocity, ballistic coefficient, altitude, and expected temperature. This may seem like a whole bunch of variables - and it is - but they all have an effect on how a bullet travels through the air and consequently how that bullet retains velocity. If you can provide the turret maker with the number of clicks between your zero point and a more distant point of impact, they can build an even more accurate turret. For example, if you’re dead on at 200 yards and there are 34 clicks between that point and where your bullet impacts at 600 yards. Regardless of who made the turret, scope, rifle, ammo, etc…you must test all of this at the range.

As you can see, the turret is literally the last piece of your hunting rifle system. Any change in ammo, scope, rings, bases, etc. will change the geometric properties and render your turret useless and a new one will need to be made. Thus, be sure that you are comfortable and confident with all of these variables, so you can avoid wasting time and money.

Keeping it Real
Let’s assume that everything works perfectly and you now have a turret on your rifle that has numbers out to 900 yards. I wish this could go without being said, but this does not automatically mean that you can accurately hunt at this distance. Long-distance shooting requires an immense amount of research and practice. Even though the best hunting rifles are capable of three-shot groups of .5-1.0 inches from a concrete bench, most shooters will give up one inch when forced to shoot from the ground, and a common 10 mph wind can add one more inch to our inaccuracy. This all adds up to a 9” group at 300 yards - and we haven’t even added in the effect of adrenaline, shortness of breath, frozen fingers, elevation, variable winds, and about a dozen other factors.

Some real-life proof: For the past two summers Vortex has hosted the Vortex Extreme Challenge, a rifle shooting competition that involves packing your rifle and gear over several miles at altitude and shooting at distances between 200 and 1000 yards. Some of the finest hunters/shooters compete each year sporting some of the best custom rifle and optics packages I’ve ever seen. You’d be hard pressed to ever find a group of sportsmen who are more talented and dedicated to long-range precision. As well prepared as these shooters are, I don’t believe a two-man team has finished the course yet and actually hit more than 50% of the steel targets! Again, they have the best equipment money can buy; they are shooting on the ground but on concrete slabs; they know the exact yardage; they have their own spotter to help with wind doping; and the majority have shot the course before…yet they still miss (i.e. wound) half of their targets. Again, there is a big difference between long-range shooting and being a responsible hunter, and it will never be redundant or cliché to keep mentioning it.

Hope for the Best; Prepare for the Worst
All that being said, I still like to have my turrets engraved to yardages well beyond my comfortable range, for two reasons: First, I firmly believe that if I practice at 500 yards, I will be a better 300-yard shooter; and if I practice at 700 yards, I will be better at 400 yards. Bowhunters do this all the time. And by practice I mean 60-100+ rounds with positive results. As much as we don’t like to talk about it or admit it, wounding animals happens. So secondly, if I’m faced with a good broadside shot at a wounded animal that is beyond my comfort zone, but this might be my last chance to finish what I started, I like having the added confidence of having turret markings out to that distance.

There as several companies making ballistic turrets for a multitude of different scopes. The brand of scope you own or hope to buy will determine which company you will need to order your turret from.

Back in 2009, the Outdoorsmans gang took a look at the Swarovski BT (ballistic turret) scope and figured out a way to build a custom turret just for that scope. Until then, no company had combined the superior optics of the Swarovski scope with a precise custom ballistic turret. The Outdoorsmans turret is one of “cleanest” and easy-to-use turrets on the market. It’s available for any of Swarovski BT Z3, Z5, or Z6. The first turret is free if you purchase your Swarovski scope from the Outdoorsmans. You can call 1-800-291-8065 or order online at www.outdoorsmans.com. Retail price: $99.

Kenton Industries
Kenton has been making drop-in style ballistic turrets for over a decade. They are now the largest manufacturer in the business, offering turrets for Zeiss, Vortex, Nikon, Nightforce, Minox, Meopta, Leupold, Bushnell, and Burris. Kenton has an easy-to-use online ordering system at www.kentonindustries.com or call them at 805-531-0476.

There is no doubt that Huskemaw has done more to promote the use of ballistic turrets than any other company in the industry. Their turret can be used exclusively on their own scope, which is available in a 5-20x50 or 3-12x42.

This will be my 4th complete hunting season using Huskemaw scopes. I like the Huskemaw optics quality, the light weight and the ease of "getting on" the game at the right yardage so quickly with the Huskemaw scopes. As you can imagine, I can use any brand of scopes at any price point on my personal hunts. I choose Huskemaw scopes because Huskemaw scopes work! We sell the Huskemaw scopes here in our store.
--Len Backus, Publisher, Long Range Hunting Online Magazine
Swarovski Optik
Working in conjunction with the Outdoorsmans, the patented Swarovski turret cap is the only one offered directly by an optics manufacturer. This turret can be fitted to any original or retro-fitted Swarovski BT model scope in the Z3, Z5 or Z6 models. For more information or to order, call 1-800-426-3089.

Join the discussion of this article HERE at the Article Discussion Forum.

<Previous | Home

Current Poll - 2
Do you plan to buy a new custom rifle in the next 12 months?
YES - Of course - 72.40%
2,345 Votes
NO - wife/girlfriend won't let me. - 27.60%
894 Votes
Total Votes: 3,239
You may not vote on this poll.

All times are GMT -5. The time now is 07:20 PM.

All content ©2010-2015 Long Range Hunting, LLC